Chapters 1-3: (Recommended)
- BeagleBone Black Rev.C+
- Micro-SD Card (4GB+)
- External 5V PSU (2A)
- Ethernet Cable
- HDMI Cable with micro-HDMI (HDMI-D) plug to regular HDMI (HDMI-A) socket adapters
- USB to Serial UART TTL 3.3V
Chapter 4:
- Breadboard and Hook-up wire
- Diodes: 1N4001, general- purpose LED
- Transistors: NPN: BC547, FET: BS270
- Voltage regulator: KA7805/LM7805
- PTC: 60R110
- Button and Switch: General purpose SPST and SPDT
- ICs: 74HC73N, 74HC03N, 74LS08N, 74HC08N, 74HC14, LM358N
- Resistors: 1M Ω, 2.2 kΩ, 2×10 kΩ, 50 kΩ, 100 Ω, 50 Ω, 1 kΩ, 470 Ω, 220 Ω, 100 kΩ POT.
- Capacitors: 10 µF, 1 µF, 0.33 µF, 0.1 µF.
- Opto-isolator: SFH617A
Chapter 5: None
Chapter 6: (covered in Chapter 4)
- FET: BS270, LED, 220 Ω resistor
- General purpose push button switch
- Light Dependent Resistor
- LM358P
- General Purpose Servo Motor (e.g., Hitec HS Series)
Chapter 7: None
Chapter 8:
- ADXL345 breakout board
- 74HC595, 8 x LED.
- Arduino Pro 3.3V (if you have the USB to Serial UART TTL 3.3V cable)
- Sparkfun Logic Level Converter Bi-directional (BOB-12009)
- Adafruit Four-channel Bi-directional Level Shifter (ID:757),
- Adafruit Eight-channel Bi-directional Logic-level Converter (ID:395),
- Watterott Four‐channel Level Shifter (20110451).
Chapter 9:
- BeagleBone Black, DMM, and oscilloscope (e.g., Analog Discovery)
- DC motor and H‐bridge interface board, e.g., DRV8835
- Stepper motor and EasyDriver interface board
- Op‐amps (LM358, MCP6002/4), Diodes, Resistors, 5 V Relay, Capacitors (From Chapter 4)
- Sharp infrared distance sensor
- 74HC595 serial shift registers
- Seven‐segment display modules
- LCD character display module
- ADXL335 analog three‐axis accelerometer
- Bluetooth adapter (e.g., Kinivo BTD‐400 Bluetooth 4.0 USB)
- Pololu sells a small SPDT relay kit (~$4),
Chapter 10:
- Analog Devices TMP36 Temperature Sensor
- Wireless Ethernet Adapters (See: Chapter 10)
Chapter 11:
Chapter 12 (See Chapter 12 Page):
- Linux USB webcam (ideally the Logitech HD Pro C920)
- USB audio and/or Bluetooth adapter
Chapter 13: As per Chapter 6.