Tips For Exercising In Summer Heat
A beautiful sunny day is the ultimate motivation to go outside and play, but the summer heat and exercise can be a risky combination. Danine Fruge, MD, Associate Medical Director at Pritikin shares twelve tips for enjoying a safe, summer exercise program, shop here for commercial fitness equipment.
1. Ease Up
Know when to ease up, especially if you’re traveling to hot and humid climates you’re unaccustomed to. Chances are, you won’t be able to exercise at the intensity you normally do, and that’s okay.
I recently talked with a patient who learned the hard way. Though she normally sails through a three-mile run at home in Oregon, she barely made it through a half-mile stroll in the sticky 95-degree heat of New Orleans last week. She was surprised to realize how much – and how quickly! – the heat and humidity wore her down.
If you normally run, walk or jog. If you walk, slow your pace. As your body adapts to the heat, gradually pick up the pace and length of your workout.
If you have a medical condition and/or take prescription medications, do ask your physician if you need to take any additional precautions.
2. Avoid the hottest part of the day.
Rise early to catch the cool of the morning, or go out at sunset or later. In the heat of midday (typically between 10 am and 4 pm) take cover under shade. Jump in a pool. Sign up for an aqua-aerobics class. And carry a fan/spray bottle for skin surface cooling.
3. Wear light-colored, lightweight clothing.
Dark colors absorb the heat, which can make you feel as if you’re wrapped in a warm blanket. Heavyweight, tight-fitting clothing will also heat you up. Keep it loose. Keep it light. More air will be able to circulate over your skin, keeping you cool.
4. Be sure to apply sunblock – UVA/UVB, preferably with titanium or zinc dioxide, or at least with avobenzene.
Reapply at two-hour intervals, even if the labels have sweat proof and water proof claims that are hours longer. Many of these “long-lasting” claims are currently under investigation. Sunburn increases the risk of premature skin aging, and increases your risk of skin cancer. Another good way to decrease sun exposure is to wear wide-brimmed hats.
5. Drink up.
Exercising in hot weather increases our body temperature. Our body’s natural cooling system can start to fail if we’re exposed to soaring temperatures for too long. The result may be heat exhaustion – that awful fatigue that makes you feel as if one more step could be your last. You may even suffer heat stroke.
If the humidity is also way up, you’re in double trouble because your sweat “sticks” to your skin; it doesn’t evaporate as readily, which can send body temperature even higher.
To keep cool, drink plenty of water. Because the Pritikin Eating Plan, full of fruits and vegetables, is so rich in water, you do not need to drink water before your workout, but while you’re exercising, drink 8 to 10 ounces of water every 20 minutes. After exercise, drink more – at minimum, another 8 ounces.
Another great way to help re-hydrate during a pause in your physical activity is to eat a piece of fruit, or even carrots or celery sticks. The fruit and veggies will also help replace valuable electrolyte loss.
6. Keep track of your hydration levels.
A good way to know that you’re hydrating properly is by checking the color of your urine. If it’s pale yellow (think lemonade), you’re well hydrated. If it’s darker (heading toward the color of apple juice), drink more.
But do be aware that some medications and supplements alter the color of urine, so this gauge, while good for many, does not work for everyone. To be safe, do drink the recommended 8 to 10 ounces of water for every 20 minutes of activity.
7. Don’t drink too much.
Drinking too much water, called overhydration, can lead to hyponatremia (low blood sodium). To stay hydrated but not overly so, here is our general guideline: Drink during and after exercise and other physical activities. At other times of the day, drink when thirsty.
The Pritikin Eating Plan provides enough sodium for active individuals and also provides at least half of the water your body needs.
8. Steer clear of sports drinks.
They’re loaded with calories. Sports drinks are not worth the caloric weight. The Pritikin Eating Plan maintains high carbohydrate stores (glycogen). There is no need for additional supplementation.
Sport drinks should only be considered if you’re of ideal body weight and exercising for long durations at high intensities. Even then, it’s a good idea to dilute sport drinks to avoid excessive calorie consumption.
Eating fruits and vegetables during exercise provides ample electrolytes for the body, even further decreasing the need for high-calorie sport drinks.
Keep in mind that the cause of muscle cramping is more often caused by dehydration than by low electrolytes (potassium, magnesium, calcium), low salt intake, or low sugar intake. So, rather than eating excessive amounts of bananas or salty or sugary snacks, increase your water intake during and after exercise, even if you don’t feel thirsty. (Use the urine-color-tracking tip described above to monitor your hydration levels.)
Dear Sir
May I ask which versions (numbers) of Debian and Eclipse you have used for the book?
(While performing the steps under chapter 7 to install the toolchain and eclipse, I’m getting errors (pretty much everywhere) and like to try (for the third time from scratch) in a virtual box with the same (presumably elder) versions that where used for the book.
However I can’t find these version numbers in the book or on this website. I don’t have the skills (or time) to solve the errors as I can’t find much about them on the internet.
The logic reasoning is that applying the steps from chapter 7 blindly isn’t applicable on newer versions of Debian, JRE and Eclipse.)
Kind Regards
Chiel Sol
Gent (Belgium)
Hi Chiel Sol, I’m just using a recent version of 64-bit Debian and Eclipse Luna:
Have you followed the steps in the video on the web page for Chapter 7 (https://www.youtube.com/watch?v=hzZHcH5quow)? I only made this last week using the steps in the chapter and it appeared to work correctly. Please watch the steps very carefully on installing the toolchain — one misstep will send everything wrong from that point on.
Kind regards, Derek.
Hey Derek,
I downloaded one the most recent images “Beagleboard.org Debian Image 2015-03-01” which I have used to flash to the eMMC from an SD card in case I corrupt the software at all. In Chap. 3 on pg 77 there’s a paragraph about the fact that the files you see when hooked up through usb on your computer are found at /boot/uboot/ for the Beaglebone. This is not true in my case as I found these files in /media/BEAGLEBONE/ and the /boot/uboot/ directory was empty. Can you explain this? Is this problem for future tutorials I might go through?
Thanks! Love the book by the way!
-Brendan
Thanks for your support Brendan. I have tried to add a description at the top of each chapter pages on the changes that this official release brings. There is a note at the top of the chapter2 page on this particular issue. It’s essentially a change that allows the new image to easily update the kernel while logged in to the BeagleBone. Kind regards, Derek.
Hi Derek,
Enjoying your book. I’m not sure if this is the right place to post this? In Chapter 6, Location 6815. I am having a problem getting the PWM overlays to load.
(note some of the responses are truncated as I’m using a serial terminal)
$ sudo sh -c “echo bone_pwm_P9_22 > $SLOTS”
[ 277.887238] pwm_test pwm_test_P9_22.15: unable to reqM
$ sudo sh -c “echo am33xx_pwm > $SLOTS”
[ 386.551286] bone-capemgr bone_capemgr.9: failed to load firmware ‘amx33xx_pw’
I then cat $SLOTS and I do see both overlays are displayed in position 7 and 9
If I change to directory /sys/devices/ocp.3/pwm_test_P9_22.15 all I see are the following entries:
modalias power subsystem uevent
My linux version:
Linux beaglebone 3.8.13-bone47 #1 SMP Fri Apr 11 01:36:09 UTC 2014 armv7l GNU/Linux
Thanks!
Andy …
hi sir..
i want to stand output after reboot…first set direction out(cat out direction), after reboot change direction for in…i want stand LED (OUT direction)after restart …pls reply sir..
thanking you
by siranjeeevi